How to use mooring whips

_____ HOW TO USE THE MOORING WHIP SYSTEM BOARDING THE BOAT. Whip diameter and length are determined by weight of boat and roughness of conditions.

Once you have mooring whips installed you can use them to hold the boat together at one place by the dock.

How to use mooring whips. Mooring Whips also require a 532 Hex Key included. _____ HOW TO USE THE MOORING WHIP SYSTEM BOARDING THE BOAT. To board the boat when the whip is in use simply unfasten one of the whip lines from the whip cleat.

This will release the whip pres-sure. Mooring Whips - How To Use Figure 1 Parts of the Whip Line Mooring System To Prepare to Leave the Dock. Uncleat the bow whip line from the upper cleat and then the base cleat.

Figure 5 shows these parts. Release the tension on the whip by letting out the whip line. Dont let go of the whip.

Mooring Whips - How To Use 2016-07-13 Figure 1 Parts of the Whip Line Mooring System To Prepare to Leave the Dock. Uncleat the bow whip line from the upper cleat and then the base cleat. Figure 5 shows these parts.

Release the tension on the whip by letting out the whip line. Dont let go of the whip line. The figure 8 knot in.

An installation video showing how Mooring Whips work when installed properly. About Press Copyright Contact us Creators Advertise Developers Terms Privacy Policy Safety How YouTube. Dockedge Mooring Whips act as springs to maintain your boat at a safe convenient distance from your dock and prevent impacts from waves or the wakes of pass.

Dockmate Mooring Whips are an excellent way to protect your boat or watercraft from damage caused by wind or high wake. These whips provide a safety zone b. As for boarding and debarking thats done with the whips disconnected.

Of course it can also be done by simply pulling on one whips line for a minute which brings the boat in closer to the dock momentarily so you can board. Release the line and the whips reactive spring force moves it. Turn up the HEAT with a subscription to Pontoon and Deck Boat Magazine.

Please check your email for the latest full issue link. Dock Edges Ultimate Whips include cast aluminum rocker base with cushionner set screw to compensate for most tidal fluctuations. The solid fiberglass rod.

Regardless of lake conditions and wind the boat NEVER touched the dock. The whips were also pretty convenient to use. The biggest challenge was making sure they were anchored bolted to a strong solid surface that could take the load.

You cant just screw them to deck boards. The whips need to be bolted to something robust like a beam or concrete. You just need enough length for a proper pole bow keeping your boat 3-4 from the dock.

Since the mooring whip line is attached to your boat cleats that are dockside it doesnt matter how wide you boat is. When making a purchase personal contact. Once the mounts are bolted into position the poles can be reinserted and the mooring whips prepared for final installation.

All that is left is tying your boat out and determining the proper length of line on the mooring whips to securely hold your vessel two to three feet away from the dock. Ive used whips for years and they work great. There are a total of 6 lines with to connection points to the boat.

• 1 line from each whip. 1 line connected towards the bow 1 line connected towards the stern - 1 line from the base of each whip to the boat. 1 line connected towards the bow 1 line connected towards the stern.

The mooring whips flex when you pull the boat in to board or exit the boat. The whips straighten out to keep the boat away from the dock. No such thing as whips that are too big only too small.

Whip diameter and length are determined by weight of boat and roughness of conditions. You will need bow and stern lines and two spring lines to use the whips effectively. On my larger boat which is 23 feet I use mooring whips to keep the boat away from the dock.

I also have a basstender 106 which bounces around alot at the dock. I was thinking of making mooring whips because they cost around 250. Here are my ideas.

Using thin PVC pipe about 10 feet long and attaching a rope to the end of it and then to the. Once you have mooring whips installed you can use them to hold the boat together at one place by the dock. The boat will not bump against the dock as it will have been safely secured on the water surface.

No worries about storage. Your boat is safe on the water by the dock. The whip is in total length ie.

• 8 inches 12 ft. - 12 inches 14 ft. - 14 inches 16 ft.

• 16 inches. For installation of mooring whips on stationary docks in locations where water levels fluctuate more than 2 ft mooring whips without a rocker base MUSTbe adjusted periodically to compensate for. The mooring whips work best if used as designed-whips extending straight out from the base.

On my Monarch Whips the force is exerted and transfered to the cam which has teeth to hold the base locked into the proper angle. Angling the whips appear to place a greater force applied more directely to the bolt holding the case and whip face plate. These are ideal for sailboats and larger heavier or high profile boats.

Mooring whips are a safe way to protect your boat against costly dockside and seawall damage. The Mooring Whip system also helps pull your boat to a safe convenient distance away from the dock. The bolts provided with your Perimeter Mooring Whip System are for use with standard Y x 6 decking.

Be sure whips are parellel with each other and perpendicular to the dock. Ali2n the bases with the holes and secure tightly with the holts nuts. Eye bolts to the front hole locations.

I had used 14 heavy duty whips for 2 years they go brittle and snap after a few years. I have heard good things about the mooring arms and they probably last longer Now I have floating dock and boat moored perpendicular to the shore they all move together only needing a fender.